Sunday, February 15, 2009

Periscope movement servo

I decided to redo my periscope movement servo as it was not perfectly centered with the first bracket I designed plus I wanted it in a smaller tube. I chopped off one of the mounting brackets on the servo and attached some wooden blocks with the new Tech-Bond glue. I am starting to like this glue :)
I then added a piece of styrene to the inside of the PVC to make up the difference in slack that the mini-servo had.
Everything fits snug inside. Now I need to go get a servo extension wire so I can mount the servo permanently with some jewelers screws. Once that is done I can make a new mounting plate for the periscope itself.

No comments: