Wednesday, June 24, 2009

Frames Frames Everywhere

Yesterday Dawmer and I continued to work on our frames over at Brad's
We got all the 1/2 inch pieces routed out. We got half of the 3/4 inch pieces routed out as well until the router bit went out on us. So with the pieces we did have done we dry fitted Dawmer's frame together.
It is pretty bad when I can now put a frame together without looking at a picture with as many as I have done.
Here is Dawmer holding his R2 internal frame work, next week we will finish up the top and bottom plates.

No comments: