PD's PSI lights

I wanted the PSI lights to have the same shape and size housings as each other because you will see them a little inside the dome, so I used two Dixie cups and reversed one of them as the back PSI circle is bigger than the front. I cut off the drinking lip on the front PSI and for the rear I cut off the bottom and glued on a plastic circle on the drinking end.
Next i silvered the insides of the cups and attached my circuits with some hot glue.
Holding the lights in place to make sure they fit the circles right i tested them out while jen took the pictures.
We still need to frost the front of the PSI lens and paint the cups black before we mount them permanently, but it is still cool to see.

Front...
Rear...